12v 150Ah Rechargeable deep Cycle lifepo4 Battery Lithium iron Battery
Product Details:
Place of Origin: | GUANGZHOU |
Brand Name: | TAC OEM ODM |
Certification: | MSDS REACH ROHS |
Model Number: | 12V 150AH |
Payment & Shipping Terms:
Minimum Order Quantity: | 50 PCS |
---|---|
Price: | usd 285 |
Packaging Details: | 10pcs for one carton |
Delivery Time: | 7-25 days after order confirm |
Payment Terms: | L/C, T/T, Western Union |
Supply Ability: | 100 per week |
Detail Information |
|||
Type: | LiFePO4 Battery Pack | Voltage: | 12V |
---|---|---|---|
Voltage: | 12.8-13.2V | Size: | 483*165*235mm |
Capacity: | 145A | Maximum Discharge Current: | 100A |
Net: | 15.5kg |
Product Description
Deep Cycle Long Cycle Rechargeable 12V 150AH LifePO4 Battery
About this item:
- [Safer Metal Shell Design] Explosion valve and matal steel shell design protect it from fire and explosion. And it has a more stable built-in 120A BMS to protect it from overcharge, over-discharge, charge over-current, discharge over-current, short-circuit, cell voltage self balance, high-temp discharge cut off.
- [ 2000+Deep Cycles] 12V150ah LiFePO4 Lithium Battery contains 2000+ deep cycles, each lithium battery can run for more than 10 years, which is 3 times longer cycles than other AGM batteries on the market.And our lithium-iron batteries can maintain 80% capacity after 2000 deep cycles.
- [Application] The150Ah LifePO4 Battery has 1920Wh Energy, and can be expanded to 30.7kwh by wired in 4S4P, Perfect for trolling motor, RV, campers, marine, travel trailer, solar power system, motor homes, UPS, off-grid etc.
Deep Cycle Long Cycle Rechargeable 12V 150AH LifePO4 Battery
Battery specifications:
No. | Items | Specifications |
Remark
|
|
1 |
Capacity for assembled cell discharging by 0.2C
|
≥145Ah |
Standard discharging method
|
|
2 |
Battery Voltage |
12.8-13.2V
|
Delivery voltage, Within 10 days from Factory
|
|
3
|
Standard charge condition
|
Charge with 0.2C constant current and 14.6Vconstant voltage, charge to 14.6V continue charging till current decline to ≤0.01C
|
Charge voltage: 14.6V±0.02V Charge current:0.2C |
|
4 |
Maximum charge current
|
|
100A
|
For continuous charging mod
|
5 |
Maximum discharge current
|
|
100A |
For continuous discharge mod
|
6 |
Standard discharging method
|
0.2C constant current discharge to 8V,
|
||
7 |
Internal Impedance
|
Assemblage Impedance
|
Measure two sides of the drawing line after assembling. .
|
|
8 |
|
15.5Kg |
Safty performance:
No. |
Items |
Test Method and Condition
|
Criteria
|
1 |
Thermal exposure test
|
Each fully charged cell, stabilized at room temperature, is placed in a circulating air-convection oven. The oven temperature is raised at a rate of 5 °C/min ± 2 °C/min to a temperature of 130 °C ± 2 °C. The cell remains at this temperature for 10 min before the test is discontinued.
|
No fire, No explosion
|
2 |
Low pressure
|
Each fully charged cell is placed in a vacuum chamber, in an ambient temperature of 20~25℃. Once the chamber has been sealed, its internal pressure is gradually reduced to a pressure equal to or less than 11.6 kPa (this simulates an altitude of 15240 m) held at that value for 6 h.
|
No leakage, No fire, No explosion
|
3. |
Short test
|
The fully charged battery is to be short-circuited by connecting the positive and negative terminals of the battery with resistance load not exceed 100mΩ. Tests are to be conducted at room temperature 20~25℃.
|
No fire, No explosion The Temperature of the Battery surface not exceeded than 150℃
|
4 |
Over Discharg
|
(After standard charge. Cells are discharged at constant Current of 0.2C to 2.0V, and the positive and negative terminal is connected by a 30Ω wire for 24 hours. Cell Condition: Fresh, Fully charged cell.)
|
No fire, No explosion |
5 |
Over charge test
|
After standard charge, continue to charge with a constant voltage 4.8V per a cell, holding 8h.
|
No leakage, No fire, No explosion
|
6 |
Soak Test
|
Put the batteries into clean water, be soaked for 24 hours.
|
No break, No fire
|